5-Stage, Under-counter Residential Reverse Osmosis System

Reverse Osmosis water purifiers are recommended by the Centers for Disease Control and the EPA as one of the most effective ways of protecting residential drinking water.

STOP buying bottled water!

Our exclusive ROpure5 Series® - 50 or 100 GPD, 5 Stage Under-the-counter RO System is a top quality product. We build each System with the highest quality "Made In The USA" components available.  You will be pleasantly surprised with the rugged quality, the ease of installation and use of this System!                

This Reverse Osmosis Water Purifier System Removes The Entire Spectrum of Harmful Contaminants

RESIDENTIAL APPLICATIONS INCLUDE: *Drinking Water     *Ice Cubes  Juices, Coffee, Tea  *Cooking Water  *Low Sodium Diets  *Auto Batteries  *Soups & Sauces  *Steam Irons  *Weight Loss Diets  *Aquariums  *Baby Formulas  *Plants  *Humidifiers  *And More!

The ROpure5®  Drinking Water System combines the latest technologies in water filtration, which includes Membrane Separation (Reverse Osmosis), Activated Carbon Adsorption and conventional filtration to reduce the entire spectrum of contaminants that can be found in water.  The  ROpure550® water purifier substantially removes heavy metals, such as barium, cadmium, chromium, lead and mercury; radium 226/228 selenium, cysts, chlorine, salts, turbidity and more.

INCLUDES: Your choice of 2 tank sizes TO FIT YOUR NEEDS:

• 1.5 Gal capacity - 12 5/8"H X 8" Diameter Tank

• 3.2 Gallon Capacity - 15" high X 11" Diameter

• NSF 51 & 68 Listed

or an optional 14.0 gallon tank

• 14.0Gallon - 15-3/8" DIA x 23-3/16" HGT ($150.00 +shipping)

PAE pressure tanks use a butyl diaphragm and polypropylene liner to separate the water and air. These materials limit the growth of germs and prevent impurities inside the tank.

• Advantages of a metal diaphragm type expansion tank vs. plastic tanks
• Metal shell has greater pressure resistance than plastic
• Lower molecular porosity of metal eliminates air pressure loss.
• Diaphragm-type design assure stable water outflow.

• Features:
• Stainless steel connection built for Reverse Osmosis water storage tank; pump tank & thermal tank applications.
• Brass cap with internal O-ring guarantees no air loss from air-vent.
• Smooth internal air vent cap prevents diaphragm damage.
• High-grade butyl diaphragm, post-cure procedure insures a tasteless and odorless water chamber.
• NSF 51 & 68 Listed.
• IAMPO approved.
• CE Mark approved.

INCLUDES:

IN-LINE BATTERY POWERED DUAL DIGITAL TDS METER!

• Measures the tap water feed  vs. the purified water being produced by your RO System.

• Use the meter to determine the quality of your drinking water and have assurance that the RO membrane is functioning properly.

• Displays "real time" TDS levels of the Feed Water and Product Water with "in & out" electrode probes.

• Auto-Off function conserves battery power. The unit shuts off automatically after 10 minutes of non-use.

TDS (Total Dissolved Solids) "rejection rate" and your RO system.

The quickest, easiest way to determine if your RO system is operating properly is to measure the TDS of the feed water vs. the TDS of the product water.  A typical residential membrane will reject 90-95% of the feed water TDS and leave your product, (drinking),water very pure. 

For example, if your feed water contains 200 ppm TDS, your RO water TDS should be between 10-20 ppm TDS.

The digital TDS monitor that is supplied with our ROpure550®  residential drinking water purification system will allow you to monitor and calculate the salt (TDS) rejection % of the RO membrane.

INCLUDES Your choice of 6 faucet* colors with or without air gap:

• Chrome w/black accents

• Brushed Nickel (Satin Stainless Look)

• All White

• All Almond

• All Black

• All Brass

*All faucets meet lead-free requirements.

INCLUDES: YOUR CHOICE OF 3 CODE LISTED DRAIN LINE ADAPTERS!

The DLA-12 Reverse Osmosis Drain Line Adapter can be used anywhere a drain saddle is typically installed under-counter, providing a code-listed solid professional connection.

The DLA-9 Reverse Osmosis Drain Line Adapter solves an RO installation problem that nothing else can.   The DLA-9 converts the plumbing of a single sink with disposal to receive the reject water from an undercounter reverse osmosis appliance or a distillation system which has an automatic backwash feature.

The DLA-D Universal Drain Line Adapter is designed for installation on all garbage disposals where the dishwasher drain inlet is located.  The DLA-D provides a code listed alternative to the use of the drain saddle for fast easy installation on all disposals.

NO PLUMBER REQUIRED!

A quick-connect faucet adapter is supplied with this system.  Attach the feed water supply in minutes!

ROpure550™ SPECIFICATIONS*:

• Product water production:.38.5GPD Average (1.6 gallons/Hour)
• Average system recovery:.....24.6% (approx: 1 gallon RO / 3 gallons waste
• Water supply:.Well or Municiple (chlorinated or non-chlorinated)
• Water pressure:..30-100 psi
• Water temperature:.40-100' F
• Daily production:.50 Gallons (Max)
• Pre-filters:.Sediment & Carbon
• Membrane:..Thin Film Composite (TFC)
• Post filter:...Activated Carbon
• pH range:.3-11
• Maximum TDS:..2000 ppm
• TDS rejection:.90-95%
• Storage tank capacity:. 3.2 Gallons
• Dimensions (unit/tank):.16" X 14" X 6" / 11" X 15" dia.
• Shipping weight:.32 lbs.

OPERATING PARAMETERS*:

• Maximum feed TDS:....................2000 ppm
• Maximum iron:.............................0.3 ppm
• Maximum hardness:......................12 GPG
• Maximum hydrogen sulfide:...........0
• Maximum manganese:...................0.05
• Maximum turbidity:.......................1 NTU
• Pressure:......................................30-100 psi (min/max)
• This RO System is not intended for use where water is microbiologically unsafe or with water of unknown quality without adequate disinfection before the unit. This drinking water system must be maintained according to the manufacturer's instructions (included), including replacement of cartridges and membranes.

CLICK HERE for Replacement Filters

CLICK HERE for this RO Systems' FAQ"S

CLICK HERE to download the Installation Manual  for this System. (592 KB  Adobe® PDF)

TAKE TIME TO COMPARE....not all residential RO systems are the same!

Listed below are some of the features that set this system apart from others:

• TRUE - 5 STAGE FILTRATION - This system contains FIVE filter housings, (3) prefilter housings with NSF listed filters, (1) RO membrane housing, and (1) polishing filter housing with NSF components included.

• Clear pre-filter housing allows you to see the first stage filter and takes the guess work out of filter changing.

• We build the system with a 3/8" - TANK TO FAUCET CONNECTION, for a "robust" flow when you turn on the faucet.  (you'd be surprised at how much of a difference this makes in the amount of flow from the faucet!). 

• Built with John Guest Speedfit NSF Connectors throughout the ENTIRE system,  these are not "cheap" fittings and they make installation and maintenance very easy and fast.

• Includes a Code Listed Drain Line Adapter. "Do it right...Do it to Code"

• Includes High quality, extremely accurate digital TDS meter, built into the system, allows you to monitor the systems' rejection rate in "real time".

• System includes your choice of a 1.5 gallon capacity, (12 5/8"H X 8" Dia.) or a 3.2 gallon capacity, (15" high X 11" Dia.) High quality steel,  Amtrol brand, NSF storage tank.

• Your choice of 6 popular Long Reach Faucet colors by Touchflo!.  Air Gap option also available on faucets for a small additional cost.

• System can be very easily upgraded at any time to 100 GPD (4 gals./hr) production. (some additional charges apply)

• Heavy duty Filter Housings, made entirely of the highest quality FDA grade NSP listed polpropylene.

• Pre-filters (NSF listed Components)
  Spun polyproplene and NSF solid block and coconut shell, activated carbon cartridges to remove sediment, taste and odors.

• High rejection (up to 98%), GE Osmonics® NSF Membrane produces up to 2 gallons/hour* while removing up to 98% of the harmful contaminants, metals and salts to provide healthful drinking water. Download Membrane Specs HERE

• Post filter (NSF Component)
  Coconut shell activated carbon to "sweeten" up and Polish the water to absolute, palatable perfection! Used after the RO membrane for great tasting water.

• The system is built on a heavy duty, powder coated steel frame with stainless steel hardware. 

• We build our own systems to order.  We do not purchase them pre-built, in large quantities from overseas. 

• We use nothing but the highest quality components available in the industry.

• EVERY unit is factory pressure tested for the proper auto shut-off function at various pressures, proper RO rejection rate and leaks, prior to shipment.

• All of the components in this system are considered "industry standard," from the fittings to the filters.  There are no proprietary parts used.  What does this mean for you?  In short, while we certainly would appreciate your repeat business, you will not be "married" to us for replacement  filters and membranes,  they are readily available in many other locations.

  * Test conditions - 60psi, 77˚ F, 500mg/l NaCl feed, 50GPD membrane.  150GPD (4.gallons/hour) 96% rejection rate membrane available as an option.

This water filter system is built with - made in the USA components and materials that are: