 |
|
Categories
|
|
|
|
|
Go Back To :> 
|
Filmtec LE-400 Low Energy RO Membrane Element
|
| |
|
Quantity in Basket:
None
Code: LE-400
Price:
$963.00
|
| |
FILMTEC LE-400 Membrane Elements
The FILMTECTM LE-400 element is a low-energy element for industrial and municipal applications that operates at low pressure to deliver energy savings in new equipment or replacement situations where energy cost is an important factor and unit price is a key driver.
-
Delivers equivalent permeate flow at 40% lower feed pressure, compared to the FILMTEC BW30-400 element.
-
Offers the proven performance and high productivity of the FILMTEC BW30-400 element construction, with lower energy use and operating expense.
-
The new FILMTEC LE-400 has an industry standard 1.125 inch ID permeate tube to facilitate element replacement
Product Name |
Nominal Active Surface Area
ft2 (m2) |
Permeate Flow Rate
gpd (m3/d) |
Stabilized Salt Rejection
(%) |
Minimum Salt Rejection
(%) |
FILMTEC LE-400 |
400 (37) |
11,500 (44) |
99.3 |
99.0 |
1. Permeate flow and salt rejection based on the following test conditions: 2000 ppm NaCl, 150 psi (10.3 bar), 77°F (25°C), pH 8, and 15% recovery.
2. For comparison, the LE-400 will have a permeate flow of 12,200 gpd (46 m3/d) and stabilized salt rejection of 99.3% when normalized to a feed solution of 1500 ppm NaCl as used by some manufacturers.
3. Flow rates for individual elements may vary but will be no more than 15% below the value shown.
4. Sales specifications may vary as design revisions take place.
5. Active area guaranteed +/-3%. Active area as stated by FilmTec is not comparable to nominal membrane area often stated by some manufacturers. Measurement method described in Form No.609-00434 |
Product Data Sheet Form No.609-00484
|
| ®™* Trademark of The Dow Chemical Company ("Dow") or an affiliated company of Dow |
|
|
|
|
|
|
Cart 0 Items
