Cart 0 Items | My Account | Order Status | Checkout

Categories

Edit Cart
BASKET: Empty

Home > Control Valves > Fleck Controls > Fleck 2510 Series > Fleck 2510 3/4" Control Valve

Fleck 2510 3/4" Control Valve

Quantity in Basket: None
Code: Fleck-2510
Price: $215.00

PLEASE CHOOSE THE TYPE OF VALVE YOU NEED:

Mechanical Programming 12 Day Timered Backwashing WITHOUT Drain and Brine Line Flow Control Injector Module. (This type of valve is used for carbon media, pH neutralizers and sediment removal etc.):

Mechanical Programming 12 Day Timered Backwashing with Drain and Brine Line Flow Control Injector Module (This type of valve is used for softener and chemical injection systems): Add $12.50

Mechanical Programming 12 Day Timered Backwashing with PVC Air Injector assembly (This type of filtering valve is used where air injection is needed): Add $13.00

Mechanical Programming Standard Range Metered Backwashing -125 to 2,100 Gals with Drain and Brine Line Flow Control Injector Module (This type of valve is used for softener and chemical injection systems): Add $64.00

Mechanical Programming Extended Range Metered Backwashing - 625 to 10,500 Gals. with Drain and Brine Line Flow Control Injector Module (This type of valve is used for softener and chemical injection systems): Add $71.50

Electronic (SE) Programming 12 Day Timered Backwashing - WITHOUT Drain and Brine Line Flow Control Injector Module (This type of valve is used for softener and chemical injection systems): Add $45.50

Electronic (SE) Programming 12 DayTimered Backwashing with Drain and Brine Line Flow Control Injector Module (This type of valve is used for softener and chemical injection systems): Add $62.00

Electronic (SE) Programming Standard Range Metered Backwashing -125 to 2,100 Gals with Drain and Brine Line Flow Control Injector Module (This type of valve is used for softener and chemical injection systems): Add $132.00

Please use the Specifications Tables below to select a Backwash Flow Control Assembly size:

If using as a Softener Valve, please specify the Brine Line Flow Control (B.L.F.C) Size:

Select Plumbing Yoke Style and Size. PLEASE NOTE a Yoke is needed to complete the installation of this valve. Choose from one of three types: Plastic, Brass Sweat or SS:

I do not want a Plastic Yoke

Yoke, 3/4" Plastic Male Pipe Thread Add $5.80

Yoke, 3/4" Plastic Male Pipe Thread, 90� Angle Yoke Add $6.50

Yoke, 1" Plastic Male Pipe Thread Add $5.80

I do not want a Brass Sweat Yoke

Brass Sweat Yoke, 3/4" Add $16.88

Brass Sweat 90 degree Angle Yoke, 3/4" Add $39.06

By-Pass Plumbing Yoke, 3/4" FIPT Stainless Steel

I do not want a SS Yoke

By-Pass, 3/4" Female Pipe Thread Stainless Steel Add $36.13

By-Pass, 1" Female Pipe Thread Stainless Steel Add $38.98

Quantity:

Please use the Specifications Sheets below to help you select Brine Line Flow Control (B.L.F.C.) and Backwash Flow Control Assembly sizes and customize the valve to your specific application.

SOFTENER SPEC SHEET:

spec

FILTER MEDIA SPEC SHEET :

2510spec

2510 Mechanical and SE Valves shown without covers

Product Features

Fully adjustable 5-cycle top mount control delivers controlled upflow backwash, downflow brining and slow rinse, rapid rinse, brine refill and downflow service

Non-corrosive, high-tech material construction
Time-tested hydraulically balanced piston, seal and spacer concept to control service flow and regeneration

Excellent flow rates – 19 GPM continuous, 24 GPM peak Backwash capacity handles tanks up to 16˝ diameter for softener applications, 16˝ diameter for filter applications

Choice of 7 or 12 day clock, manual or meter initiated regeneration, mechanical or electronic control

Options

Corrosion-free bypass valve

Backwash filter

Meter initiated regeneration

Manual operation

Environmental cover

No hard water bypass piston

Fleck 2510 Valve Literature:

Fleck 2510 Service Manual

Simple Electronics (SE) Spec Sheet

SE Service Manual